Nickel welding Wire, ErNiCu-7, Monel 400/K500 Welding Wire

Product Detail

Nickel welding Wire, ErNiCu-7, Monel 400/K500 Welding Wire,
AWS A5.14 ErNiCu7, Monel 400/K500 Nickel Welding, nickel welding wire,
/haynes-25-alloy-l605-co350-welding-wire-product/

ErNicu-7 (Monel 400/K500) Welding Wire

Welding Material Zita: Nickel welding Wire, ErNiCu-7, Monel 400/K500 Welding Wire

MOQ: 15kg

Fomu: MIG (15kgs/spool), TIG (5kgs/bhokisi)

Saizi: dhayamita 0.01mm-8.0mm

Saizi Yakajairwa: 0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM

Maitiro: Inopindirana neChitupa AWS A5.14 ASME SFA A5.14


Bata Isu Kuti Udzidze Zvakawanda!

ErNiCu-7 Yakavakirwa Material is Monel 400 uye Monel K500, Iyi welding wire inonyanya kushandiswa kugadzira MONEL400 alloy, MONELR404 alloy uye MOENLK-500 alloy ne tungsten inert-gasi welding, MGW uye yakanyura arc welding, uye inogona zvakare kushandiswa kugadzira pamusoro pesimbi. neMGW uye yakanyura arc welding.

Inokurudzirwa kushandisa Erni-1 nickel waya chivharo kune chaiwo gasi welding mamiriro.

ERNiCu-7 Chemical Composition

C

Al

Ni

Si

Mn

P

S

Fe

Cu

Ti

Zvimwe

≤0.15

≤1.25 62.0-69.0 ≤1.25 ≤4.0 ≤0.02 ≤0.015 ≤2.5 Bal 1.5-3.0 ≤0.50

 

 

ERNiCu-7 Typical Welding Parameters

Diameter Process Volt Amps Shielding Gasi
In mm
0.035 0.9 GMAW 26-29 150-190 75% Argon + 25% Helium
0.045 1.2 GMAW 28-32 180-220 75% Argon + 25% Helium
1/16 1.6 GMAW 29-33 200-250 75% Argon + 25% Helium
0.035 0.9 GTAW 12-15 60-90 100% Argon
0.045 1.2 GTAW 13-16 80-110 100% Argon
1/16 1.6 GTAW 14-18 90-130 100% Argon
3/32 2.4 GTAW 15-20 120-175 100% Argon
1/8 3.2 GTAW 15-20 150-220 100% Argon
3/32 2.4 SAW 28-30 275-350 Yakakodzera flux ngaashandisei
1/8 3.2 SAW 29-32 350-450 Yakakodzera flux ngaashandisei
5/32 4.0 SAW 30-33 400-550 Yakakodzera flux ngaashandisei

ERNiCu-7 Mechanical Properties

Condition Tensile Simba MPa (ksi) Yield Strength MPa (ksi) Elongation%
AWS reauirement 480(70) Typical Hazvina kutaurwa Hazvina kutaurwa
Yakajairika mhinduro sewelded 530(77) 360(53) 34

Sei ERNiCu-7?

Hapana Preheat inodiwa, yakanyanya kupisa tembiricha 150 ℃ uye hapana PwHT inodiwa
Zvishandiso zvakasiyana-siyana zvewelding zvinosanganisira kujoinha alloys kuNickel 200 uye copper-nickel alloys-.
Inoshandiswa zvakanyanya mumashandisirwo emugungwa nekuda kwekupokana kwayo kune inoparadza mhedzisiro yemvura yegungwa nemvura ine brackish.
Inogona kushandiswa MIG pamusoro pesimbi mushure mekutanga layer ine nickel 208

MOQ: 15kg
Fomu: MIG (15kgs/spool), TIG (5kgs/bhokisi)
Kukura: Diameter 0.01mm-8.0mmKukura Kwakafanana:0.8MM/1.0MM/1.2MM/1.6MM/2.4MM/3.2MM/3.8MM/4.0MM/5.0MM
Maitiro: Inopindirana neChitupa AWS A5.14 ASME SFA A5.14


  • Zvakapfuura:
  • Zvinotevera:

  • Nyora meseji yako pano uye titumire kwatiri